GS 300 RWD V6-3.0L (3GR-FSE) (2006)
a. Remove the 2 screws.
b. Remove the 2 clips and retainer from the luggage compartment door.
INSTALLATION
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. INSTALL BACK DOOR GARNISH RETAINER SUBASSEMBLY
a. Install the 2 clips and retainer to the luggage compartment door.
b. Install the 2 screws.
2. INSTALL LICENSE PLATE LIGHT ASSEMBLY
a. Install the license plate light and 2 screws to the luggage compartment door.