GS 300 RWD V6-3.0L (3GR-FSE) (2006)
d. Install the rear combination light with the 3 nuts.
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT
4. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE LH
5. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE RH
6. INSTALL REAR FLOOR FINISH PLATE
7. INSTALL TOOL BOX
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
a. Perform initialization.
CAUTION: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.