GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Alignment: Service and Repair
Front Wheel Alignment Adjustment
FRONT WHEEL ALIGNMENT ADJUSTMENT
1. INSPECT TIRES
2. MEASURE VEHICLE HEIGHT
a. Bounce the vehicle at the corners up and down to stabilize the suspension and inspect vehicle height.
Vehicle height
Vehicle Height 3GR-FSE
Vehicle Height 3UZ-FE
Measuring points:
A: Ground clearance of front wheel center
B: Ground clearance of front center position of front suspension lower arm assembly front bush installation
C: Ground clearance of rear center position of rear suspension No. 2 arm bush installation bolt screw thread
NOTICE:
Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
HINT:
Bounce the vehicle at the corners up and down to stabilize the suspension and inspect the vehicle height.