GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-404003.png)
(2) While releasing the belt tension by turning the belt tensioner counterclockwise, put the V belt on the tensioner pulley
NOTICE:
^
Put the backside of the V belt on the tensioner pulley and idler pulley.
^
Check that the drive belt is properly set to each pulley.
2. INSTALL V-BANK COVER SUB-ASSEMBLY
3. INSTALL NO.1 AIR CLEANER INLET
a. Install the air cleaner inlet No.1 with the bolt.
Torque: 5.0 Nm (51 kgf-cm 44 inch lbs.)
4. INSTALL COOL AIR INTAKE DUCT SEAL
