GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Fluid - Differential: Service and Repair
DIFFERENTIAL OIL ADJUSTMENT
1. INSPECT FRONT DIFFERENTIAL OIL (for 4WD)
a. Stop the vehicle on a level place.
b. Remove the differential filler plug and gasket.
c. Check that the oil surface is within 5 mm (0.20 inch) of the lowest position of the inner surface of the differential filler plug opening.
NOTICE:
^
Excessively large or small amounts of oil may cause trouble.
^
After replacing oil, drive the vehicle and check the oil level.
HINT: If necessary, fill the front differential carrier with hypoid gear oil.
d. Check for oil leakage when the oil level is low.
e. Install the differential filler plug and a new gasket.
Torque: 39 Nm (400 kgf-cm, 29 ft. lbs.)
2. INSPECT REAR DIFFERENTIAL OIL (for 3GR-FSE)
a. Stop the vehicle on a level place.
b. Using a hexagon wrench (10 mm), remove the differential filler plug and gasket.