GS 300 RWD V6-3.0L (3GR-FSE) (2006)
c. Check that the oil surface is within 5 mm (0.20 inch) of the lowest position of the inner surface of the differential filler plug opening.
NOTICE:
^
Excessively large or small amounts of oil may cause trouble.
^
After replacing oil, drive the vehicle and check the oil level.
HINT: If necessary, fill the rear differential carrier with hypoid gear oil.
d. Check for oil leakage when the oil level is low.
e. Using a hexagon wrench (10 mm), install the differential filler plug and a new gasket.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
3. INSPECT REAR DIFFERENTIAL OIL (for 3UZ-FE)
a. Stop the vehicle on a level place.
b. Using a hexagon wrench (10 mm), remove the differential filler plug and gasket.
c. Check that the oil surface is within 5 mm (0.20 inch) of the lowest position of the inner surface of the differential filler plug opening.
NOTICE:
^
Excessively large or small amounts of oil may cause trouble.
^
After replacing oil, drive the vehicle and check the oil level.
HINT: If necessary, fill the rear differential carrier with differential synthetic gear oil.
d. Check for oil leakage when the oil level is low.
e. Using a hexagon wrench (10 mm), install the differential filler plug and a new gasket.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
4. ADD FRONT DIFFERENTIAL OIL (for 4WD)