GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Low Tire Pressure Indicator: Service and Repair
Tire Pressure Warning System Registration
REGISTRATION
1. IN CASE OF TIRE PRESSURE MONITOR ECU REPLACEMENT
a. Read ID stored in the old ECU using the intelligent tester.
2. IN CASE OF TIRE PRESSURE MONITOR VALVE SUB-ASSEMBLY AND/OR TIRE PRESSURE MONITOR ECU
REPLACEMENT
a. Read ID written on the tire pressure monitor valve.
3. REGISTER TRANSMITTER ID
NOTICE: It is necessary to register the transmitter ID in the tire pressure monitor ECU when replacing the tire pressure monitor valve
sub-assembly and/or tire pressure monitor ECU.
a. Set the tire pressure of 4 wheels to the specified value.
When at least 4 people are in the vehicle.
b. Connect the intelligent tester to DLC3.
c. Turn the engine switch on (IG).
d. Read and write down the ID (ID1 to ID4) by using the DATA LIST
e. Select the REGIST TIRE following the intelligent tester screen. (UTILITY - REGIST TIRE)
f.
Select the registration mode "MAIN".
HINT: Select "2nd" when registering in 2nd.
g. Input the ID (ID 1 to ID4) using the intelligent tester and transmit it to the tire pressure monitor ECU.