GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-474001.png)
Maintenance Required Lamp/Indicator: Service and Repair
Without Navigation System
ENGINE OIL MAINTENANCE REMINDER LIGHT
The system must be reset after the engine oil replacement. Reset the system by the following procedure:
1. Push the ODO/TRIP switch in the switch box to change the display to blank.
2. Turn the engine switch off.
3. Turn the engine switch on with the trip meter RESET switch held down.
4. Keep pushing the RESET switch for longer than 7 seconds after the engine switch is turned on.
After the above operation, the master warning light comes on, a warning tone sounds and the OIL MAINT RESET appears to inform you that engine
oil maintenance has been reset.
