GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Tire Pressure Sensor: Service and Repair
TIRE PRESSURE MONITOR VALVE
COMPONENTS
REPLACEMENT
1. REMOVE FRONT WHEEL
2. REMOVE REAR WHEEL
3. REMOVE TIRE PRESSURE MONITOR VALVE SUB-ASSEMBLY
a. Remove the valve core and cap, and release the air from the tire.
b. After ensuring that a sufficient amount of air has been released, remove the nut and washer that is used to secure the tire pressure monitor
valve sub assembly and drop the sensor inside the tire.
HINT: Keep the removed cap, valve core, nut and washer.