GS 300 RWD V6-3.0L (3GR-FSE) (2006)
a. When inserting tester probes into a connector, insert them from the rear of the connector.
b. Use a repair wire to check the connector if it is impossible to check continuity from the rear of the connector.
5. PRECAUTION FOR DISCONNECTING THE BATTERY CABLE
NOTE:
-
When disconnecting the negative (-) battery terminal, initialize the following system after the terminal is reconnected.
System Name
Power Window Control System
Sliding Roof System
Clearance Sonar System
Variable Gear Ratio Steering System
-
Perform the RESET MEMORY (AT initialization) operation after replacing the automatic transmission assembly, engine assembly or ECM.
HINT: RESET MEMORY cannot be completed by only disconnection of the battery terminal.