GS 300 RWD V6-3.0L (3GR-FSE) (2006)
CAN VIM.
b. Press "ENTER" on the hand-held tester via CAN VIM.
c. The screen displays the ECUs and sensors that are properly connected to the CAN communication system.
HINT: There is a communication stop in the system of any properly connected ECUs or sensors that are not displayed.
2. CHECK FOR INSTALLED SYSTEMS (ECUs & SENSORS) THAT ADOPT CAN COMMUNICATION
a. Systems (ECUs, sensors) that adopt CAN communication vary depending on the vehicle's optional settings. Check which systems (ECUs,
sensors) are installed on the vehicle.
3. DTC TABLE BY ECU
HINT:
-
In the CAN communication system, CAN communication system DTCs can be displayed by the ECU using the intelligent tester
-
If CAN communication system DTCs are output , trouble cannot be determined only by the DTCs. Perform troubleshooting according to
"HOW TO PROCEED WITH TROUBLESHOOTING (If, however, U0235 or U1101/U01102 is output alone, see the dynamic laser cruise
control system.)