GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
16. CHECK COMBINATION SWITCH ASSEMBLY (WINDSHIELD WIPER SWITCH)
a. Disconnect the K22 switch connector.
Part 1
Part 2
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
17. CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
a. Disconnect the R5 switch connector.