GS 300 RWD V6-3.0L (3GR-FSE) (2006)
P: Indicates the reference showing the position on the vehicle of Relay Block Connectors in the system circuit.
Example : Connector "1" is described and is installed on the left side of the instrument panel.
Q: Indicates the reference showing the position on the vehicle of J/B and Wire Harness in the system circuit.
Example : Connector "3C" connects the Instrument Panel Wire and J/B No.3. It is described and is installed on the instrument panel left side.
R: Indicates the reference describing the wiring harness and wiring harness connector (the female wiring harness is shown first, followed by the male
wiring harness).
Example : Connector "IE1" connects the floor wire (female) and Instrument Panel Wire (male). It is described and is installed on the left side kick
panel.
S : Indicates the reference showing the position of the ground points on the vehicle.
Example : Ground point "BO" is described and is installed on the back panel center.
How to Read Connector List
HOW TO READ CONNECTOR LIST