GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-902002.png)
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
INSTALLATION
1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)
a. Install the sensor with the bolt.
Torque:10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the sensor connector.
2. INSTALL VVT SENSOR (for Intake Side of Bank 2)
a. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the sensor connector.
3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)
