GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Cold Start Injector: Service and Repair
REMOVAL
1. DISCHARGE FUEL SYSTEM PRESSURE
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
3. REMOVE V-BANK COVER
4. DISCONNECT FUEL MAIN TUBE
5. REMOVE FUEL PRESSURE PULSATION DAMPER
6. REMOVE COLD START INJECTOR
a. Disconnect the cold start injector connector.
b. Remove the 2 bolts, gasket, cold start injector from the surge tank.
NOTE: Do not fold or bend the hose.
DISASSEMBLY
1. DISASSEMBLE COLD START INJECTOR
a. Remove the bolt, 2 gaskets and hose from the injector.
REASSEMBLY
1. ASSEMBLE COLD START INJECTOR