GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-944002.png)
a. Install 2 new gaskets and the hose to the cold start injector with the bolt.
Torque: 15 N.m (153 kgf.cm, 11 ft.lbf)
NOTE: Be careful not to damage the gasket.
INSTALLATION
1. INSTALL COLD START INJECTOR
a. Install a new gasket to the intake air surge tank.
HINT: Align the protrusion of the gasket on the intake air surge tank.
b. Install the cold start injector with the 2 bolts.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
NOTE: Do not fold or bend the hose.
