GS 300 RWD V6-3.0L (3GR-FSE) (2006)
-
Keep the connector and pipe free from foreign matter.
-
If the connector and pipe are stuck together, pinch the connector and turn it carefully to disconnect it.
-
Put the connector in a plastic bag to prevent damage and contamination.
18. REMOVE INTAKE AIR SURGE TANK
a.
Disconnect the throttle motor connector.
b. Disconnect the IACV connector.
c. Disconnect the wire harness clamp from the surge tank.
d. Remove the 2 bolts and intake manifold stay.
e. Disconnect the 2 wire harness clamps from the surge tank stays.
f.
Remove the 4 bolts and 2 surge tank stays.
g. Remove the bolt and disconnect the water hose joint.
h. Using a 5 mm hexagon socket wrench, remove the 7 bolts, 2 nuts and gasket.
HINT: Cover the intake manifold port to prevent foreign matter from entering it.
19. REMOVE INTAKE MANIFOLD