GS 300 RWD V6-3.0L (3GR-FSE) (2006)
a. Remove the bolt and fuel pipe from the fuel delivery pipe.
NOTE: Pull and remove the fuel pipe in a straight line to avoid damage to the seal surface of the delivery pipe's O-ring.
26. REMOVE NO. 2 FUEL DELIVERY PIPE
a. Disconnect the 3 wire harness clamps.
b. Remove the 2 bolts and 2 nuts.
c. With the connectors still connected, disconnect the delivery pipe.
NOTE:
-
Make sure that the fuel delivery pipe is disconnected from the delivery pipe (LH side).
-
Be extremely careful not to touch or strike the tips of the injectors.
-
Pull and remove the fuel pipe in a straight line without tilting it.
d. Disconnect the 3 connectors from the 3 injectors.
e. Remove the 3 injector vibration insulators from the cylinder head.
27. REMOVE NO. 1 FUEL DELIVERY PIPE