GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. Install the VSV for EVAP to the air cleaner hose.
c. Connect the MAF meter connector and clamp to the air cleaner.
3. INSTALL NO. 2 VENTILATION HOSE
a. Connect the ventilation hose to the cylinder head cover with the clamp.
4. INSTALL V-BANK COVER
5. INSTALL ENGINE ROOM SIDE COVER LH
6. INSTALL ENGINE ROOM SIDE COVER RH
7. INSTALL COOL AIR INTAKE DUCT SEAL
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.