GS 300 RWD V6-3.0L (3GR-FSE) (2006)
INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
a. Apply a coat of engine oil to an O-ring of the sensor.
b. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
c. Connect the sensor connector.
2. INSTALL COMPRESSOR WITH PULLEY ASSEMBLY
3. INSTALL ENGINE UNDER COVER
a. Install the under cover with the 10 bolts and 3 clips.
4. INSTALL FAN AND GENERATOR V-BELT
5. INSTALL V-BANK COVER
a. Install the V-bank cover with the 2 nuts.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
6. INSTALL NO. 1 AIR CLEANER INLET
a. Install the air cleaner inlet with the bolt.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)