GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-685003.png)
19. CHECK FOR OIL LEAKAGE
a. Start the engine, and check that there are no oil leaks after performing maintenance.
20. INSTALL V-BANK COVER
21. INSTALL ENGINE ROOM SIDE COVER RH
22. INSTALL COOL AIR INTAKE DUCT SEAL
23. INSTALL ENGINE UNDER COVER
24. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
25. WARM UP ENGINE
a. After the engine is warmed up, check that the maintained parts operate normally.
