GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-729001.png)
Crankshaft Position Sensor: Testing and Inspection
INSPECTION
INSPECT CRANKSHAFT POSITION SENSOR
a. Measure the resistance between the terminals.
NOTE: In the table above, the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50 degrees C (14
to 122 degrees F). "Hot" means approximately 50 to 100 degrees C(122 to 212 degrees F).
If the resistance is not as specified, replace the sensor.