GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Cruise Control Module: Service and Repair
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
3. REMOVE DISTANCE CONTROL ECU ASSEMBLY
a. Disconnect the connector.
b. Remove the nut and distance control ECU.
INSTALLATION
1. INSTALL DISTANCE CONTROL ECU ASSEMBLY