GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. Remove the 2 nuts and ECM from the ECM box.
INSTALLATION
1. INSTALL ECM
a. Install the ECM to the ECM box.
NOTE:
-
Install the ECM on the ECM box with the name plate facing the inside of the vehicle.
-
Make sure that there is no foreign matter on the gasket surface of the ECM box.
-
Insert the stud bolt on the vehicle rear side to the ECM first.
-
Make sure that stud bolts are securely installed into the front and rear bolt holes.