lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Front Passenger Side Knee Airbag Assembly|Page 10366 > < Front Passenger Side Knee Airbag Assembly|Page 10364
Page 1
background image

Air Bag: Service and Repair
Curtain Shield Airbag Assembly

Disposal

DISPOSAL

HINT:  When scrapping a vehicle equipped with the SRS or disposing of the curtain shield airbag assembly, be sure to deploy the airbag first in
accordance with the procedure described. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of TOYOTA MOTOR
SALES, U.S.A., INC.

CAUTION:

-

Never dispose of a curtain shield airbag assembly that has an undeployed airbag.

-

The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a nuisance to nearby
residents.

-

When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from electrical
noise.

-

When deploying the airbag, perform the operation at least 10 m (33 ft) away from the curtain shield airbag assembly.

-

The curtain shield airbag assembly becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.

-

Use gloves and safety glasses when handling a curtain shield airbag assembly with a deployed airbag.

-

Do not apply water, etc. to a curtain shield airbag assembly with a deployed airbag.

-

Always wash your hands with water after completing the operation.

1. DISPOSE OF CURTAIN SHIELD AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)

HINT:  Prepare a battery as the power source to deploy the airbag.

a. Check the function of the SST.
b. Precaution.
c. Disconnect the cable from the negative battery terminal. Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
d. Remove the roof headlining assembly.
e. Install the SST.

1. Disconnect the connector from the curtain shield airbag assembly.

NOTE:  When handling the airbag connector, take care not to damage the airbag wire harness.

2. After connecting the SST  to each other, connect them to the curtain shield airbag  assembly.

SST 09082-00700, 09082-00802 (09082-10801, 09082-20801)

Front Passenger Side Knee Airbag Assembly|Page 10366 > < Front Passenger Side Knee Airbag Assembly|Page 10364