GS 300 RWD V6-3.0L (3GR-FSE) (2006)
a. Disconnect the 2 connectors and remove the instrument panel wire assembly from the front passenger airbag assembly.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
b. Remove the 2 screws.
c. Disengage the 5 hooks (A).
d. Disengage the 5 hooks (B) and remove the front passenger airbag assembly from the instrument panel.
INSTALLATION
1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
a. Engage the 5 hooks (A).
b. Engage the 5 hooks (B) and install the front passenger airbag assembly on the instrument panel.
c. Install the 2 screws.