GS 300 RWD V6-3.0L (3GR-FSE) (2006)
d. Connect the 2 connectors to the front passenger airbag assembly.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
2. INSTALL HEATER TO REGISTER NO.1 DUCT
3. INSTALL SIDE DEFROSTER NOZZLE NO.1 DUCT
4. INSTALL INSTRUMENT PANEL SAFETY PAD SUBASSEMBLY
HINT: Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY".
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
7. INSPECT SRS WARNING LIGHT