GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1675003.png)
NOTE: Take care not to damage the SST wire harness.
3. Move the SST at least 10 m (33 ft) away from the vehicle front side window.
4. Maintaining enough clearance for the SST wire harness in the front side window, close all doors and windows of the vehicle.
NOTE: Take care not to damage the SST wire harness.
5. Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the battery negative (-) terminal.
f.
Deploy the airbag.
1. Check that no one is inside the vehicle or within a 10 m (33 ft) radius of the vehicle.
2. Press the SST activation switch and deploy the airbag.
CAUTION:
-
When deploying the airbag, make sure that no one is near the vehicle.
-
The front passenger side knee airbag assembly becomes extremely hot when the airbag is deployed, so do not touch it for at least 30
minutes after deployment.
-
Use gloves and safety glasses when handling a front passenger side knee airbag assembly with a deployed airbag.
-
Do not apply water, etc. to a front passenger side knee airbag assembly with a deployed airbag.
-
Always wash your hands with water after completing the operation.
HINT: The airbag is deployed as the LED of the SST activation switch comes on.
2. DISPOSE OF FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)
NOTE:
-
When disposing of the front passenger side knee airbag assembly, never use the customer's vehicle to deploy the airbag.
-
Be sure to follow the procedure detailed when deploying the airbag.
HINT: Prepare a battery as the power source to deploy the airbag.
a. Check the function of the SST.
b. Remove the front passenger side knee airbag assembly.
CAUTION:
-
When removing the front passenger side knee airbag assembly, work must be started 90 seconds after the engine switch is turned off
and the negative (-) terminal cable is disconnected from the battery.
-
When storing the front passenger side knee airbag assembly, keep the airbag deployment side facing upward.
