GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. With the driver side knee airbag assembly installed on the vehicle, perform a visual check including the given: Cuts, minute cracks or marked
discoloration on the driver side knee airbag assembly.
2. INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check
b. With the driver side knee airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned, replace the
driver side knee airbag assembly with a new one:
-
Cuts, minute cracks or marked discoloration on the driver side knee airbag assembly.
-
Cracks or other damage to the connector.
-
Deformation or cracks on the instrument panel reinforcement.
CAUTION: For removal and installation procedures of the driver side knee airbag assembly. Be sure to follow the correct procedure.
Front Passenger Airbag Assembly
ON-VEHICLE INSPECTION
1. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
b. With the front passenger airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned, replace the
instrument panel with a new one: Cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag
assembly.
2. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check.