GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. With the front passenger airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned, replace the
front passenger airbag assembly, instrument panel or instrument panel reinforcement with a new one:
-
Cuts, minute cracks or marked discoloration on the front passenger airbag assembly.
-
Cracks or other damage to the connectors.
-
Deformation or cracks on the instrument panel or instrument panel reinforcement.
CAUTION: For removal and installation procedures of the front passenger airbag assembly. Be sure to follow the correct procedure.
Front Passenger Side Knee Airbag Assembly
ON-VEHICLE INSPECTION
1. INSPECT FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
b. With the front passenger side knee airbag assembly installed on the vehicle, perform a visual check including the given: Cuts, minute cracks or
marked discoloration on the front passenger side knee airbag assembly.
2. INSPECT FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT
DEPLOYED)
a. Perform a diagnostic system check.