GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. With the front seat airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned,replace the front
seat airbag assembly with a new one:
-
Cuts, minute cracks or marked discoloration on the front seat airbag assembly.
-
Cracks or other damage to the wire harness or connector.
CAUTION: For removal and installation procedures of the front seat airbag assembly. Be sure to follow the correct procedure.
Rear Seat Side Airbag Assembly
ON-VEHICLE INSPECTION
1. REAR SEAT AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check
b. With the rear seat airbag assembly installed on the vehicle, perform a visual check including the given: Cuts, minute cracks or marked
discoloration on the rear seat airbag assembly.
2. REAR SEAT AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check
b. With the rear seat airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned, replace the rear
seat airbag assembly with a new one:
-
Cuts, minute cracks or marked discoloration on the rear seat airbag assembly.
-
Cracks or other damage to the connector.
CAUTION: For removal and installation procedures of the rear seat airbag assembly. Be sure to follow the correct procedure.
Steering Pad
ON-VEHICLE INSPECTION