GS 300 RWD V6-3.0L (3GR-FSE) (2006)
c. Rotate the spiral cable with steering sensor counterclockwise slowly by hand until it feels firm.
NOTE: Do not turn the spiral cable with steering sensor by the airbag wire harness.
d. Rotate the spiral cable with steering sensor clockwise approximately 2.5 turns to align the marks.
NOTE: Do not turn the spiral cable with spiral sensor by the airbag wire harness.
HINT: The spiral cable with steering sensor will rotate approximately 2.5 turns to both the left and right from the center.
5. INSTALL STEERING WHEEL ASSEMBLY
For 3GR-FSE
For 3UZ-FE
6. INSPECT STEERING WHEEL CENTER POINT
7. INSTALL STEERING PAD
8. INSTALL STEERING WHEEL NO.3 COVER LOWER
9. INSTALL STEERING WHEEL NO.2 COVER LOWER
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. INSPECT STEERING PAD
12. PERFORM INITIALIZATION
13. INSPECT SRS WARNING LIGHT.