GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1712001.png)
Child Seat Tether Attachment: Service and Repair
Child Restraint Seat Tether Anchor
REMOVAL
1. REMOVE REAR SEAT CUSHION ASSEMBLY
2. REMOVE REAR SEAT HEADREST ASSEMBLY RH &LH
3. REMOVE REAR SEATBACK ASSEMBLY
4. REMOVE REAR SEAT BELT OUTER ANCHOR
5. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
6. REMOVE REAR DOOR SCUFF PLATE
7. REMOVE REAR SEAT SIDE GARNISH
8. REMOVE ROOF SIDE GARNISH INNER
9. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER
a. Detach the 2 clips and 2 claws, and remove the anchor cover.
10. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Sunshade)
11. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
12. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
a. Remove the bolt and anchor bracket.
INSTALLATION
