GS 300 RWD V6-3.0L (3GR-FSE) (2006)
a. Install the tether anchor cover to the package tray trim panel as shown in the illustration.
5. INSTALL ROOF SIDE GARNISH INNER
6. INSTALL REAR SEAT SIDE GARNISH
7. INSTALL REAR DOOR SCUFF PLATE
8. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
9. INSTALL REAR SEAT BELT OUTER ANCHOR
10. INSTALL REAR SEATBACK ASSEMBLY
11. INSTALL REAR SEAT HEADREST ASSEMBLY RH & LH
12. INSTALL REAR SEAT CUSHION ASSEMBLY