GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1728003.png)
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
a. Insert the tip of the adjuster into the pillar, and align the adjuster's bolt hole to the pillar's bolt hole.
b. Install the bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
a. Install the seat belt with the 2 bolts. First install the upper bolt, and then install the lower bolt.
Torque: 7.5 N.m (77 kgf.cm, 66 in.lbf) for bolt A
42 N.m (428 kgf.cm, 31 ft.lbf) for bolt B
b. Connect the pretensioner connector labeled A, as show in the illustration.
c. Connect the tension reducer connector labeled B.
d. Connect the pre-collision safety connector labeled C.
