GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1729006.png)
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
8. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
a. Install the anchor part of the rear seat inner with center belt assembly RH seat belt with the bolt as shown in the illustration.
b. Connect the connector labeled A.
NOTE: Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
9. INSTALL REAR SEAT BELT OUTER ANCHOR
a. Install the anchor part of the rear seat outer belt assembly with the bolt.
NOTE: Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
10. INSTALL REAR SEATBACK ASSEMBLY
11. INSTALL REAR SEAT HEADREST ASSEMBLY RH AND LH
a. Install the 2 headrests.
12. INSTALL REAR SEAT CUSHION ASSEMBLY
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. PERFORM INITIALIZATION
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
