GS 300 RWD V6-3.0L (3GR-FSE) (2006)
1. INSTALL REAR SEAT OUTER BELT ASSEMBLY
a. Align the seat belt positioning hole with the claw and install the retractor of the seat belt with the 2 bolts. First install the rear bolt, and then
install the front bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf) for bolt A
7.5 N.m (77 kgf.cm, 66 in.lbf) for bolt B
b. Connect the pretensioner connector, as shown in the illustration.
c. Connect the tension reducer connector.
2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Sunshade)
3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY