GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-150002.png)
2. REMOVE RECLINING POWER SEAT SWITCH KNOB
a. Using a screwdriver, detach the knob.
HINT: Tape the screwdriver tip before use.
3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
a. Using a screwdriver, detach the knob.
HINT: Tape the screwdriver tip before use.
4. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY
a. Disconnect the 2 rubber bands of the front seatback board from the front seat frame.
b. Remove the 5 screws.
c. Detach the claw and remove the cushion shield assembly in the order indicated in the illustration.
d. Disconnect the connector from the lumbar front power seat switch.
