GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-154001.png)
Seat Heater Switch: Testing and Inspection
INSPECTION
1. INSPECT SEAT HEATER SWITCH
a. Disconnect the K40 switch connector.
b. Measure the resistance of the switch
HINT: As the dial is being turned, the resistance changes gradually.If the result is not as specified, replace the switch.
c. Connect the battery's positive (+) lead to terminal 4 (ILL+) and the negative (-) lead to terminal 12 (E).
d. Check the indicator light.
