GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Seat Memory Switch: Service and Repair
REMOVAL
HINT: Use the same procedures for the RH and LH side.
1. REMOVE DOOR INSIDE HANDLE BEZEL
a. Using a screwdriver, detach the 3 claws and remove the bezel.
HINT: Tape the screwdriver tip before use.
2. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY
a. Detach the 2 claws and remove the trim lower cover.
b. Remove the screw.
c. Using a clip remover, detach the 9 clips and remove the trim cover.
d. Disconnect the 2 cables from the inside handle.