GS 300 RWD V6-3.0L (3GR-FSE) (2006)
INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
a. Using SST, install the sensor to the exhaust manifold RH.
SST 09224-00010
Torque:
40 N.m (408 kgf.cm, 30 ft.lbf) for use with SST
44 N.m (449 kgf.cm, 32 ft.lbf) for use without SST
HINT: Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
b. Connect the sensor connector.
2. INSTALL BATTERY TRAY
a. Install the battery tray with the 2 bolts.
Torque:5.0 N.m (51 kgf.cm, 44 in.lbf)
3. INSTALL POWER STEERING ECT ASSEMBLY
4. INSTALL BATTERY
5. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
a. Using SST, install the sensor to the exhaust manifold RH.
SST 09224-00010