lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0751 Set|Page 1218 > < Engine Controls - MIL ON/DTC's P0171/P0174/P02195/P02197|Page 1212
Page 1
background image

Oxygen Sensor: All Technical Service Bulletins
Engine Controls - MIL ON/DTC P0751 Set

L-SB-0076-09

Rev1

July 9, 2009

MIL "ON" DTC P0751

Service Category
Drivetrain

Section
Automatic Transmission/Transaxle

Market
USA

Applicability

TSIB REVISION NOTICE

May 13, 2010 Rev1:

^

Parts Information has been updated with additional parts (oxygen sensor). 

Any previous printed versions of this service bulletin should be discarded.

Introduction

Some 2006 model year GS 300 vehicles may exhibit a MIL "ON" condition with DTC P0751 stored (Shift Solenoid "A" Performance). DTCs P2714 or
P0894 may also be stored. The Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) detection logic for DTC P0751 has been
revised to prevent false detection of P0751 and erroneous MIL "ON".

To properly address this condition two different repair procedures are provided. Carefully review the Repair Procedure Overview below and all steps of
this bulletin BEFORE beginning any repair.

Repair Procedure Overview

1. Confirm stored DTCs and verify vehicle condition matches this bulletin.

2. Verify calibration ID to determine if this repair has already been performed.

3. Determine if Repair Procedure A or B should be performed.

^

Repair Procedure A:
Replace ECM (PCM), rear oxygen sensors, and update ECM (PCM) calibration (as necessary).

^

Repair Procedure B:
Update ECM (PCM) calibration ONLY

Engine Controls - MIL ON/DTC P0751 Set|Page 1218 > < Engine Controls - MIL ON/DTC's P0171/P0174/P02195/P02197|Page 1212