GS 300 RWD V6-3.0L (3GR-FSE) (2006)
3. REMOVE FRONT EXHAUST PIPE ASSEMBLY
4. REMOVE PROPELLER W/CENTER BEARING SHAFT ASSEMBLY
5. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
6. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY
7. SEPARATE ENGINE REAR MOUNTING MEMBER
8. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a. Disconnect the park/neutral position switch connector.
b. Remove the nut and transmission control shaft lever RH.
c. Using a screwdriver, pry out the lock washer.
d. Remove the lock nut and lock washer.
e. Remove the bolt and park/neutral position switch.
INSPECTION