GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Auxiliary Power Outlet: Service and Repair
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
3. REMOVE CONSOLE UPPER PANEL ASSEMBLY
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
6. REMOVE CONSOLE BOX PLATE
7. REMOVE CONSOLE BOX REGISTER ASSEMBLY
8. REMOVE CONSOLE BOX
9. REMOVE REAR CONSOLE ARMREST ASSEMBLY
10. REMOVE CONSOLE BOX SUB-ASSEMBLY UPPER
11. REMOVE POWER OUTLET SOCKET ASSEMBLY
a. Rotate the socket to disengage the notch.
b. Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.
c. Remove the socket from the cover.
INSTALLATION