GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. Install the power steering ECU assembly to the battery tray with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
c. Install the ground cable terminal with bolt (A).
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
d. Install the battery tray support No. 1.
2. INSTALL BATTERY
a. Install the battery.
b. Install the battery insulator.
c. Install the battery clamp with the 2 nuts.
Torque: 2.9 Nm (30 kgf-cm, 26 inch lbs.)
d. Connect the positive (+) battery cable to the battery.
Torque: 5.6 Nm (57 kgf-cm, 50 inch lbs.)
e. Connect the negative (-) battery cable to the battery.
Torque: 5.6 Nm (57 kgf-cm, 50 inch lbs.)
3. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal.
4. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT