GS 300 RWD V6-3.0L (3GR-FSE) (2006)
6. REMOVE FRONT SUSPENSION MEMBER PROTECTOR LOWER
a. Remove the 4 bolts and the front suspension member protector lower.
7. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY NO. 2
a. Fix the steering wheel with the seat belt in order to prevent rotation.
HINT: This operation is useful to prevent damage to the spiral cable.
b. Loosen bolt (A) and remove bolt (B), then slide the steering intermediate shaft assembly No. 2.
HINT:
^
Do not remove bolt (A).
^
Do not disconnect the steering intermediate shaft assembly No. 2 from the power steering link assembly.
c. Put matchmarks on the steering intermediate shaft assembly No. 2 and the power steering link assembly.
d. Separate the intermediate shaft assembly No. 2 from the power steering link assembly.
8. SEPARATE TIE ROD END LH
a. Remove the clip and the castle nut.