GS 300 RWD V6-3.0L (3GR-FSE) (2006)
f.
Remove the 2 bolts, 2 washers, 2 nuts, and the power steering link assembly from the front suspension cross member.
DISASSEMBLY
1. FIX POWER STEERING LINK ASSEMBLY
a. Using SST, secure the power steering link assembly.
SST 09612-00012
HINT: Tape the SST before use.
2. REMOVE TIE ROD END LH
a. Put matchmarks on the tie rod end LH and the steering rack end sub-assembly.
b. Loosen the lock nut, and remove the tie rod end LH and the lock nut.
3. REMOVE TIE ROD END RH
HINT: Perform the same procedure as for the LH side.
4. REMOVE STEERING RACK BOOT CLIP
a. Using pliers, remove the 2 steering rack boot clips.