GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1481004.png)
5. CONNECT TIE ROD ASSEMBLY
6.
CONNECT FRONT SUSPENSION UPPER ARM (for 4WD)
7.
CONNECT SPEED SENSOR FRONT
8.
HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY
9.
STABILIZE SUSPENSION
10. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING
11. FULLY TIGHTEN FRONT SUSPENSION LOWER ARM (for 2WD)
12. INSTALL ENGINE UNDER COVER
13. INSTALL FRONT TIRE
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
14. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
