GS 300 RWD V6-3.0L (3GR-FSE) (2006)
c. Install the nut.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
d. Connect the connector.
e. Install the rear tire.
2. INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY FRONT
a. Install the height control sensor with the 2 bolts.
Torque: 13.5 N.m (138 kgf.cm, 10 ft.lbf)
b. 4WD:
Install the height control sensor link with the bolt to the lower arm.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
c. 2WD:
Install the height control sensor link with the nut to the lower arm.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
d. Install the front tire.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
a. Perform initialization.