GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1514002.png)
c. Put matchmarks on the sensor link and bracket.
d. Remove the 2 bolts and sensor.
INSTALLATION
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY REAR
a. Install the height control sensor with the 2 bolts.
Torque: 13.5 N.m (138 kgf.cm, 10 ft.lbf)
b. Align matchmarks on the height control sensor and bracket.
